TDR-26
Tri-Deck Roller Finishing Mower
CUTTING WIDTH
25′ 8″
CUT HEIGHT RANGE
1/2″ to 4″
RECOMMENDED PTO H.P.
75 to 90
Maximizing productivity and reducing operating cost is what the TDR-26 / TDR-26G is all about. Designed with a ‘ideal sized’ 25’8” cutting swath, it balances the need for increased cutting capacity in a cost effective roller mower. The TDR-26 / TDR-26G is “easy on the turf” when turning at the headlands for more harvestable acres! Like all of our mowers, we designed the TDR-26 as if we were maintaining the mower ourselves, so simplifying and reducing service requirements was an important goal. Maintenance free blade spindles, with extended 100 hour PTO shaft greasing intervals and fewer grease fittings overall means more time cutting – less time maintaining. We kept it simple: no electro-hydraulic valves or sensors are required. For the ultimate in reliability, many components are fully interchangeable with Progressive’s field proven TDR-22 and TDR-30 models. Focusing on the needs of the natural grass producer, Progressive offers four blade options for the TDR-26. The producer can optimize their cut and maintenance costs depending upon the growing conditions by selecting between two fixed blades and two Pro-EZ Change replaceable tip blade options – all featuring Progressive’s renown cut quality
AVAILABLE IN PAINTED AND GALVANIZED DECK SHELL FINISH
- Maximize Productivity
- Maintenance Free Features
- Familiar Design
- Ideal Front to Back Deck Balance
- Bolt-on Deck Shells (Both Painted and Galvanized Finishes)
| Part Number: | 520826 (Painted decks) 520826G (Galvanized Decks) |
| Recommended PTO H.P.: | 75 to 90 |
| Mowing Capacity: * (Assumes no overlap or turning) | 4 mph 12.4 acres per hour * 6 mph 18.6 acres per hour * 7.5 mph 23 acres per hour * |
| Cut Height Range: | 1/2″ to 4″ |
| Cutting Width: | 25′ 8″ |
| Transport Width: | 104″ |
| Transport Tires: | 33×16 LL-16.1 10pr |
| Weight: | 6200 lbs |
| Transport Length: | 17′ |
| Std. Equipment: | The tractor is required to have a single hydraulic float circuitHeavy-duty construction, open rear-discharge, easy cutting height adjustment.Heavy-duty 6” dia. Rollers supported by 2 – 1.25” ductile HEX bearings.Maintenance free blade spindles and 100 hr greasing intervals on all PTO shafts.Twelve 24” blades for a superior cut. Tip speed 18,292 FPMPro Lift-N-Turn system.Bolt on galvanized deck skins, provide ease of deck replacement if necessaryLT 305/70R 16 transport tire. 6,000# load rated axleIndependent suspension on transport wheels for smoother transport. |
| Opt. Equipment: | 230057 Spare – high floatation tire and rim (33×16 LL-16.1 10pr)522610 High Lift Fixed Blade Kit (6 Pieces per kit) requires 1 of 522610 and 1 of 607592607592 High Lift Fixed Blade Kit (8 Pieces per kit) requires 1 of 522610 and 1 of 607592526594 PRO EZ II Blade Tips Bulk Pack (50 Pieces – W/O hardware) HIGH LIFT526648 PRO EZ II Blade Tips Bulk Pack (50 Pieces – W/O hardware) LOW LIFT526866 PRO-EZ II Blade Bolt Kit – 25 PCS W/ hardware |
Disclaimer: Under Progressive’s policy of continuous improvement, they reserve the right to change specifications and designs without prior notice. The illustrations shown do not necessarily represent the standard version of product offered by Progressive Turf Equipment Inc.