TD65
Tri-Deck Finishing Mower
CUTTING WIDTH
15′ 6″
CUT HEIGHT RANGE
1″ to 5″
RECOMMENDED PTO H.P.
30 to 50
The Progressive TD65 is a Tri-Deck rotary finishing mower providing a 15.5 foot cut. By using your 30-50 H.P. tractor the TD65 can mow up to 90 acres in an eight hour day. The TD65 is operator friendly with straight forward and very low maintenance requirements.
Three independent floating decks are mounted on a robust transport frame. These decks conform to and follow most undulations and other ground conditions that are encountered during the mowing of parks, school yards, and other large recreation areas without scalping. Maintenace Free Blade Spindles offer peace of mind and lower cost of operation.
The superior cut is the result of our deck design. High lift rotary blades create enough vacuum to lift the grass for a smooth, even cut and then disperse the clippings evenly through the rear discharge system which is unique and an integral part of the deck design. The result is a superior after cut appearance.
Only minutes are required to change cutting heights from 1” to 5” without the use of tools. In addition, all operating functions for transport and mowing positions are activated from the tractor seat.
The TD65 is another example of the ingenuity and quality that goes into producing a durable, reliable, rotary finishing mower that is easy to maintain. The TD65 is not only of superior quality, providing a superior cut, it is “The Better Built Choice
- Maintenance Free Blade Spindles
- Heavy Duty Blade Spindle
- 3/16″ Steel Deck
- Cut Height- Easy to Adjust
- Excellent Floatation
Specifications
| Part Number: | 526515B |
| Recommended PTO H.P.: | 30 to 50 |
| Mowing Capacity: * (Assumes no overlap or turning) | 2 mph 3.7 acres per hour * 4 mph 7.5 acres per hour * 6 mph 11.3 acres per hour * |
| Cut Height Range: | 1″ to 5″ in 3/8″ steps |
| Cutting Width: | 15′ 6″ |
| Turning Radius: | Zero turn |
| Transport Width: | 8′ 6″ |
| Transport Tires: | 18 X 9.50 X 8 NHS, 6 ply, Turf Saver Tires |
| Transport Height: | 7′ 6″ |
| Weight: | 2720 lbs |
| Transport Length: | 14′ |
| Std. Equipment: | Heavy-duty construction, open rear-discharge, easy cutting height adjustment. Heavy-duty gauge wheel tires with tapered roller bearings.Maintenance free blade spindle assemblies for reduced maintenance. High lift blades for superior cut.Tip speed 18,287 FPM. Anti-Scalp Rollers, twelve in total. CV Shaft Input System for easy connection to any tractor |
| Opt. Equipment: | 522311 Heavy Duty Transport Tires (in lieu of standard tire factory installed)521811 Spare – Heavy Duty Transport Tire (20.5 x 8 -4 ply) (must order 2 if replacing standard tire – requires corner pin p/n 526472)522603 High Lift Blade Kit (replacement set of 9 fixed black blades)522606 Low Lift Blade Kit (replacement set of 9 fixed blades) 522507 Mulching Kit – (Requires 522611 Mulch Blade Kit) not installed 522611 Mulch Blade Kit (set of 9 blades) |
Disclaimer: Under Progressive’s policy of continuous improvement, they reserve the right to change specifications and designs without prior notice. The illustrations shown do not necessarily represent the standard version of product offered by Progressive Turf Equipment Inc.