SDR-90

Single Deck Finishing Roller Mower

CUTTING WIDTH
90″
CUT HEIGHT RANGE
1/2″ to 4″
RECOMMENDED PTO H.P.
35

The Progressive SDR-90 is a three point hitch version of the popular tri-deck TDR-22 mower and it utilizes many of the same components. Not to be confused with other, light duty three point hitch mowers that are available, the SDR-90 has a 6” diameter rollers on both the front and rear across the full width of the deck. Ideal for smaller mowing jobs where a quality cut is mandatory, the SDR’s rollers allow you to cut as low as ½”, while simultaneously striping and rolling the mowing surface. To minimize service requirements, the SDR-90 is equipped with field proven maintenance free blade spindles. Progressive’s SDR-90 mower is another example of the ingenuity and quality that goes in to producing a durable, reliable rotary finishing mower that is easy to maintain. It shows once again why the SDR-90 is “The Better Built Choice”.

  • Easy height adjustment
  • Full width rollers
  • High Blade Tip Speed
  • Simpler Maintenance = Lower Cost

Specifications

Part Number:531990
Recommended PTO H.P.:35
Mowing Capacity: * (Assumes no overlap or turning)2 mph 1.8 acres per hour*
4 mph 3.56 acres per hour* 6 mph 5.33 acres per hour*
Cut Height Range:1/2″ to 4″
Cutting Width:90″
Transport Width:92″
Weight:1380 lbs
Std. Equipment:
  • Heavy-duty construction, open rear discharge, easy cutting height adjustment
  • Heavy-duty 6” dia. rollers supported by 2 – 1.25” ductile HEX bearings.
  • Maintenance free blade spindle assemblies for reduced maintenance.
  • High lift blades for superior cut. Tip speed 18300 FPM.
Opt. Equipment:
  • 522365 24” Low Lift Blade (four required)
  • 522364 24” High Lift Blade (four required)